BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
4. MAINTENANCE SCREENS
Once you are sure the 2 electronic cards are functioning and with information from the client and the
error messages displayed activate the diagnostic assistance module which consists of 3 screens.
This will allow you to control the input and output devices and peripherals feeding the cards:
- Screen 1 gives control of temperature, door, water level and gas safety inputs.
- Screen 2 gives control of outputs to ventilation, heating, lighting, safety contactor, electro
technical ventilation and the vent outlet.
- Screen 3 gives control of the hydraulics outputs, solenoids, chemical pumps, wash pump, drain
valve and wash tank.
4.1 SERVICE MENU
Operations
Data exchange (HACCP, Photos,
Recipes, Manual, Consumptions
(Energy, water …)
Client parameters (Adapts to suit)
Installation parameters
Technical/After sales parameters
Maintenance information
To Next Page
Loading...
