BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
2. PROGRAMME SETTINGS
This is required if a relay card, a facia card is changed or there is an upgrade of the FastPAD software.
Before programming check the software is in the local language and adjust if necessary.
2.1 SETTING THE SOFTWARE LANGUAGE
- Select the "SERVICE" menu
- Select the "Client parameters" screen
- Enter the password CHEF Permanent pass word (Upper or lower case)
- Change the language if necessary
To Next Page
Loading...
