ACS 553, ACS 563 Service Manual
1 689 975 295 2021-04-13 Robert Bosch GmbH
12
Introduction
The machine launches into the initial Setup
It is needed to complete all the setup
Carry out the following setup:
1. Language selection.
2. License agreement review.
4. Date and Time adjustment.
5. Edit Print Header.
6. Service Vacuum.
7. Oil inject viscosity selection.
At the end of the initial setup procedure it is
suggested to:
•
only).
1. Call up the Main Menu.
2. Select icon.
3. Select icon.
• Select to access the following
functions.
a vehicle with a refrigerant already present.
Flushes residual oil from the machine to prepare
Provides a method of removing oil and impurity
Use this function to transfer refrigerant from a
be adjusted up or down to suit the user’s needs.
Refer to “Tank Fill” in the Maintenance section.
The vehicle air conditioning
system being serviced.
Moisture and other incondensables
vacuum pump.
The tank
designed specifically for this machine has
the ACS 553 has a disposable capacity of
Model No. ACS 553 or ACS 563.
Different oil types in the vehicle
air-conditioning system depending on the
vehicle manufacturer.
Refrigerant is recovered
ISV.
R134a (ACS 553) or R1234yf
(ACS 563).
A disposable tank
included.
indicates that the
Bluetooth connection is enabled.
to set which side to charge
thru (high pressure, low pressure or
both sides).
to set the unit of measurement
(ml or oz).
to set the unit of measurement
(kg, oz or lb).
To Next Page
Loading...
