ACS 553, ACS 563 Service Manual
1 689 975 295 2021-04-13 Robert Bosch GmbH
14
Introduction
: To search for
available WiFi networks.
: To display some WiFi
connection data used.
: to perform a WiFi
network connection test used by the
machine.
: To disable
the WiFi network connection stored on the
machine.
: to perform manual scan
and selection of WiFi network.
To enable or disable the asanetwork function.
For further information contact Customer
Service.
To enable or disable the CoRe function.
For more information see Connected Repair
[CoRe] chapter on the user manual.
• Select icon to return to the Setup
Menu.
• Select to access the following
functions.
from the refrigerant. To meet requirements, it is
Model
R134a
(alert 56 kg)
Model
R1234yf
This menu item displays the filter capacity
remaining until the machine locks down and no
longer functions. Refer to “Filter Maintenance”
in the Maintenance section.
Displays the amount of time remaining until
is replaced. Refer to the “Vacuum Pump
Maintenance” in the Maintenance section.
Displays internal storage vessel (ISV) pressure
and temperature. It is used to eliminate
incondensables gas and helps to limit the
pressure in the ISV.
Use to verify internal scale calibration. Refer to
“Calibration Check” in the Maintenance section
of this manual.
To activate or deactivate the pressure values
display of the machine.
Displays the revision level of the software in
the unit.
Performs double test (in vacuum and pressure)
to detect any leakage on the machine.
For service center use only.
For production use only.
“Calibrate Air Flow” in the Diagnostics and
Testing section.
• Select icon to return to the Setup
Menu.
To Next Page
Loading...
