Opening the Case
Notice!
To open the AMC2-4WE, first remove all pluggable connectors.
The AMC2-4WE case consists of a top cover mounted with a
two-point snap-in closure on a chassis. To open the case, push
down the two snap-ins with a screwdriver, then swing the cover
down.
Figure 4.3: Opening the AMC2-4WE case
4.3
AMC2 Wiegand
Extension
Installing | en 21
Bosch Sicherheitssysteme GmbH 2016-11 | AMC2-4WE |
To Next Page
Loading...
