Bosch AMC2 - Introduction

Introduction
Description
The extension module AMC2-4WE is equipped with four
Wiegand type reader-interfaces plus eight inputs and eight
outputs. Hence with the AMC2-4WE it is possible to double the
number of readers on an AMC2-4W from 4 to 8.
Figure 3.1: The extension module AMC2-4WE
The AMC2-4WE can not be deployed as an independent
controller but only as an extension module for the AMC2-4W.
Control and access decisions and bookings are carried out by
the AMC2-4W alone.
Notice!
The AMC2-4WE can only be used with AMC2-4W. As it provides
Wiegand interfaces it cannot be coupled with an AMC2-4R4.
The AMC2-4W can be extended by a maximum of one
AMC2-4WE plus a maximum of three I/O extension modules. The
I/O extension modules AMC2-8IOE, AMC2-16IOE, or AMC2-16IE
(in any combination) are, like the AMC2-4WE, connected via the
AMC2-4W’s extension interface.
3
3.1
12 en | Introduction
AMC2 Wiegand
Extension
2016-11 | AMC2-4WE | Bosch Sicherheitssysteme GmbH