Why is the video rolling on my Bosch Security Camera?
If you're experiencing rolling, noisy, or distorted video on your Bosch Security Camera, start by checking the integrity of all connectors and splices of the shielded Ethernet cable.
What to do if my Bosch Security Camera has no network connection?
If your Bosch Security Camera is not connecting to the network, verify all network connections. Make sure that the distance between any two Ethernet connections does not exceed 100 m (328 ft). If you are using a firewall, ensure that the Video Transmission mode is set to UDP.
How to fix a dark picture on Bosch Security Camera?
If your Bosch Security Camera has a dark picture, check that the Gain Control is set to High and that the Auto Iris Level is set to the appropriate level. Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or less. If needed, restore all camera settings.
Why does my Bosch Security Camera reboot frequently?
If your Bosch Security Camera frequently or intermittently reboots, try testing it with an alternative power supply. Also, check the Bosch website for any available software updates that may address this issue.
General| Low-light Performance | Starlight technology |
|---|---|
| Ingress Protection | IP66 |
| IK Rating | IK10 |
| Sensor Type | 1/2.8-inch CMOS |
| Video Compression | H.265, H.264, MJPEG |
| Lens Type | Varifocal |
| Frame Rate | Up to 60 fps |
| Vandal Resistance | IK10 |
| Optical Zoom | 30x |
| Operating Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Power | PoE+ (IEEE 802.3at) |
| Aperture | F1.6 to F4.7 |
| Day/Night | True Day/Night |
| Audio | 2-way audio |
| Network Interface | 10/100 Base-T Ethernet |
| Power Supply | 24 VAC; High PoE (IEEE 802.3at, Class 4) |
| Focal Length | 4.3 mm to 129 mm |
Details the hardware and software prerequisites for camera operation.
Guides on setting up network connectivity and IP addressing for the camera.
Explains security measures for accessing the camera, including initial password setup.
Provides access to core camera settings like sensor mode, image rotation, and LEDs.
Adapts video data transmission settings for different network environments.
Covers configuration of storage media, including iSCSI and local SD cards.
Configures how the camera responds to alarms, including IP address connections.
Identifies common problems and provides actions to resolve them.
Explains how to perform a hardware reset for various troubleshooting scenarios.
To Next Page