Bosch AUTODOME IP starlight 5100i IR - Page 32

32 en | Installing a Parapet Roof Mount and Camera AUTODOME IP starlight 5100i IR
2021-02-19 | 0.7 |
Installation Manual
Bosch Security Systems
6. Remove the End Cap from the front of the arm. Feed the video, control, and power wires
up through the bottom of the pipe arm and out the front end.
Figure10.2: NDA-U-RMT
1 End Cap with O-ring
2 Parapet Pipe Arm
3 1/4-20 SS Cap Screw
4 Down Pipe
5 10-24 SS Pan Head Screw
7. Fold back the video, control, and power wires at the front end of the arm and route them
down and out through the Down Pipe. Replace the End Cap.
8. Wrap at least five layers of Teflon tape around the Down Pipe threads.