AUTODOME IP starlight 5100i IR Installing a Pipe Mount and Camera | en 41
Bosch Security Systems
Installation Manual
2021-02-19 | 0.7 |
6. Put the camera at approximately 45 degrees. Install the camera in the mounting cap with
the hook.
7. Connect the RJ45 plug and the RJ45 socket on the camera cable and assemble the IP66
accessory kit to ensure a waterproof seal.
8. Connect the mating connectors on the user-supplied cables to the matching connectors
on the camera. Refer to the chapter Connection for more information.
To Next Page
Loading...
