AutoDome Easy Mount Maintenance | en 7
Bosch Security Systems Instruction Manual F01U064856 | 1.0 | 2007.03
12. Attach the camera to the mounting plate by turning the dome camera to the right approx-
imately 15 degrees and locking into place as seen in Figure 2.8.
Fig. 2.8 Attaching the AutoDome Easy to the mounting plate
13. Secure the safety locking screw with the locking torx wrench (T-10) supplied with the
AutoDome Easy.
3Maintenance
No special maintenance is required other than occasional cleaning of the window. Regularly
scheduled maintenance will help prolong the operation life of this unit. Clean the viewing win-
dow as needed with a mild, nonabrasive detergent in water and a soft cloth.
To Next Page
