Why is there no camera control on my Bosch Security Camera?
If there is no camera control on your Bosch Security Camera, ensure that the address is properly set and that the biphase or RS-232 is connected. Also, check if other cameras can be controlled; if not, check the control system.
Why am I missing some menu selections on my Bosch Security Camera?
Menu selections specific to the AutoTrack appear only if the AutoTrack option is present. Some features have been added with new firmware revisions. To confirm the firmware version on the monitor, use ON-66-ENTER.
General| Pan Range | 360° continuous |
|---|---|
| Ingress Protection | IP66 |
| Power Supply | 24 VAC |
| Image Sensor | CMOS |
| Digital Zoom | 12x |
| Protocols | ONVIF |
| Day/Night | Yes (ICR filter) |
| Camera Type | PTZ (Pan-Tilt-Zoom) |
This guide is intended for qualified installation and service personnel.
All safety and operating instructions should be read and retained for future reference.
Explains conventions like bold, italic, underline, and courier used in the document.
Explains symbols like NOTICE, CAUTION, WARNING, and DANGER for safety information.
Contact details for USA service, technical support, and spare parts.
Contact information for Canada, Europe, Middle East, and Asia Pacific regions.
Information on obtaining datasheets and viewing publications on the Bosch website.
Lists all parts included for the wall mount and pipe mount installations.
Step-by-step instructions for securely mounting the AutoDome to a wall.
Step-by-step instructions for mounting the AutoDome using a pipe mount.
Provides detailed measurements and diagrams for the wall mount.
Provides detailed measurements and diagrams for the pendant pipe mount.
To Next Page
