Bosch B4512 - Page 111

B93x/B94x keypads configuration of Primary Destination Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [1] Reporting > [3] Routing. The keypad shows the primary device
for the selected route.
3. Use
/[PREV] or /[NEXT] to scroll though the list of routes and go to the route you
want to program.
4. Press [Edit] to edit the primary destination device for the selected route.
5. Use /[PREV] or /[NEXT] to scroll though the list of devices (for destination 1) and go
to the destination 1 option you want to select for the current device (for example, Phone
1).
6. To keep destination 1, escape from the menu. To change to a different destination (2, 3,
or 4), press [Edit Destination] and continue to Step 8.
7. Delete existing characters, if necessary, and then enter the new number.
8. Press [Save] to save the change, and then escape from the menu.
Backup Destination Device
Notice!
Keypads show and allow you to select the Backup Destination Device only after you select a
Primary Destination Device.
B91x/B92x keypads configuration of Backup Destination Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [1] Reporting > [3] Routing. The keypad toggles between showing
the current primary and backup setting for the selected route.
3. Use [PREV] or [NEXT] to scroll though the list of route and go to the route you want to
program.
4. Press [ENTER] to edit the route.
5. Press [NEXT] to go to the option to edit the backup route.
6. Press [ENTER]. The keypad shows Set Route Device.
7. Use [PREV] or [NEXT] to scroll though the list of device (for destination 1) and go to the
destination 1 option you want to select for the current device (for example, Phone 1).
8. Press [ENTER] to select the device. The keypad shows Set route dest 1-4. To keep
destination 1, escape from the menu. To change to a different destination (2, 3, or 4),
continue to Step 9.
9. Delete the current number, and then enter the new number.
10. Press [ENTER] to save the change, and then escape from the menu.
B93x/B94x keypads configuration of Backup Destination Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [1] Reporting > [3] Routing. The keypad shows the primary device
for the selected route.
3. Use
/[PREV] or /[NEXT] to scroll though the list of routes and go to the route you
want to program.
4. Press [Backup] to edit the backup destination device for the selected route.
5. Use [PREV] or [NEXT] to scroll though the list of devices (for destination 1) and go to the
destination 1 option you want to select for the current device (for example, Phone 1).
Control Panel Keypad Installer menu | en 111
Bosch Security Systems, Inc. Installation and System Reference Guide 2015.07 | 12 | F.01U.287.180