Bosch BAT 645 - Initial Startup; 4.1 Connecting Charging Cables; 4.2 Install Wall Mounting; Operation

1 689 975 285 2017-06-30| Robert Bosch GmbH
Overview | BAT 645 | 17 en
3. Overview
3.1 BAT 645
1
2
3
4
6
8
7
9
5
4510026-04_Ko
Fig. 1: Overview
1 On/Off switch
2 Mains port
3 Connection for red (+)/black (–) charging cable
4 USB port
5 Selection keys
6 TFT display
7 Red LED for "Mains on", "Incorrect polarity", "Fault or overload"
8 Green LED for "charging operation"
9 Yellow LED for "Back-up mode" and "Buffer mode"
3.1.1 Top part of housing
1
2
4510026-10_shd
Fig. 2: Top part of housing
1 Circuit board M1 (control and display unit)
2 USB circuit board
3.1.2 Lower housing part
4510026-09_shd
1
2
3
4
Fig. 3: Lower housing part
1 Fan
2 Power module (Slave)
3 Connection for red (+)/black (–) battery charging cable
4 Power connector with on/off switch (power inlet socket
connector)