Bosch BEA 150 - Maintenance (Service Date); Read Adjustment Data

22
4.7.8 Maintenance (service date)
4.8 Read adjustment data
i In the case of service intervals stipula-
ted by law, confirm completed service
on the exhaust-gas analyzer. This sets
the internal clock to the next service
date.
Select Yes by clicking on it or using the
tab key  .
Confirm that service
has been performed
by clicking Yes or by pressing E.
Confirm the new service date by clicking
OK or with E. The screen now returns to
the Test functions menu.
Here, the parameters set in the Adjust-
ment functions menu are read out.
Quit the Read adjustment data menu
by clicking OK or with E.