4
3 Introduction and intended use
The CISS is a multi-sensor device detecting acceleration, angular velocity and magnetic fields, as well as environmental
conditions (temperature, humidity, light, air pressure, and noise). The robust housing and the small outline makes it
perfectly suitable for industrial retrofit applications, such as condition monitoring and predictive maintenance.
Configuring the device enables the user to address a broad variety of use cases, including interpreting the sensor data
by smart algorithms.
3.1 Intended use
The CISS operates according to the information provided in the operating instructions and the data sheet.
Validation and testing of any use or operation, which requires specific requirements and standards, which are not explicitly
mentioned in these documents, is the customer’s responsibility.
Please also see chapter 9.6 Restrictions of use.
Using the CISS with non-real-time operating systems (eg. Windows or Linux) might cause problems during the data
transmission. Increased utilisation of the target system might cause data loss or – in extreme cases - an interruption of
the data transfer.
3.2 Scope of delivery
CISS device
CISS cable
Mounting material (screws, washers, magnets)
Quick start guide
CISS: overview (back side)
2
3
4
5
1
1
Light Sensor
2
Status LEDs
3
Membrane (humidity measurement, pressure equalisation)
4
Power supply LED
5
Mounting holes
Note: Labels or stickers should not cover the membrane; otherwise, the humidity and pressure measurement
cannot be guaranteed within the specified performance.
To Next Page
Loading...
