Product description
5
Compress 7400i AW – 6721833372 (2021/09)
3 Product description
3.1 Scope of delivery
Fig. 2 Scope of delivery
[1] Heat Pump
[2] Cover and side panels
[3] Tripod feet
3.2 Heat pump details
The CS7400i AW heat pumps are intended for connection to the AWM/
AWMS/AWMB or AWE/AWB indoor units.
Possible combinations:
Table 5 Outdoor unit combinations
AWM
1)
, AWMS
2)
and AWMB
2)
are equipped with an integrated electric
booster heater.
AWMS
2)
is equipped with an integrated solar heat exchanger.
AWMB is equipped with an integrated buffer cylinder.
AWE is equipped with an integrated electric booster heater.
AWB
2)
is intended for an auxiliary heater (electric, oil and gas heating)
with mixer.
3.3 Declaration of conformity
The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
3.4 Type plate
The data plate is located on the rear side of the heat pump. It contains
information on the output, part number and serial number and also the
date of manufacture. The product designation AirO S Hydro is also
specified on the data plate.
AWM / AWMS /
AWMB
AWE / AWB CS7400i AW
995 OR
9 9 7 OR
1) Not available in United Kingdom.
2) Not available in United Kingdom and Ireland.
To Next Page
Loading...
