Bosch DIVAR IP all-in-one 4000 User Manual

20 en | Installing a SATA hard drive DIVAR IP all-in-one 4000
2022-10 | V02 | F.01U.407.904
Installation manual
Bosch Security Systems B.V.
1
2
1 Release button 2 Hard drive tray handle
i
Notice!
Do not operate the device with the hard drive trays removed from the bays.
Installing a hard drive tray into a hard drive bay
To install a hard drive tray into a hard drive bay:
1. Insert the hard drive tray horizontally into the hard drive bay, orienting the hard drive tray
so that the release button is on the right.
2. Push the hard drive tray into the bay until the handle retracts and the hard drive tray
clicks into the locked position.
3. Close and lock the front cover.

Bosch DIVAR IP all-in-one 4000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 4000
Category	Recording Equipment
Language	English