Bosch EV2000 Series - User Manual

EV2000 Series Wallbox Charger
Installation and Operation Manual

Summary

Safety and Wiring Instructions

Installation Site Selection and Safety Compliance

Service Wiring Procedures

Service Wiring Procedures Details

Ground Connection Procedures

Steps for establishing a proper earth ground connection for electrical safety.

240 V Single-Phase Wiring Guide

277 V Single-Phase Wiring Guide

480 V Three-Phase Wiring Guide

208 V Three-Phase Wiring Guide

Pre-Installation Steps for EV2000 Charger

Essential Safety Requirements

Critical safety protocols and precautions to follow before commencing installation.

Installing the EV2000 Wallbox Charger

Charger Installation Preparation

Wall Mounting the Charger Unit

Connecting the EV2000 Wallbox Charger

Power Wiring Guide

Step-by-step instructions for connecting the main power supply wires.

Single-Phase Power Wiring (240;277 V)

Detailed connection guide for single-phase 240V and 277V models.

Three-Phase Power Wiring (480 V)

Wiring instructions for the 480V three-phase model.

Three-Phase Power Wiring (208 V)

Wiring instructions for the 208V three-phase model.

Operating the EV2000 Wallbox Charger

Start Charging Process

Steps for connecting the EV and initiating charging using an RFID card.

Maintenance of the EV2000 Charger

Annual Maintenance Requirements

EV2000 Wallbox Charger Specifications

Bosch EV2000 Series Specifications

General

Brand	Bosch
Model	EV2000 Series
Category	Battery Charger
Language	English