Bosch FCS-8000-VFD-B - Page 23

AVIOTEC IP starlight 8000 Planning | en 23
Bosch Sicherheitssysteme GmbH Operation manual 2019.01 | 10 | F.01U.318.200
Influencing factor Countermeasure Information
BLINKING LIGHTS Check for blinking lights in
your application. Use masking
to exclude blinking lights
from the detection or
increase the verification time
(see Adjustments of image
regions, page 44).
If blinking lights cause false
alarms, set Sensitivity to
mid/low (see chapter General
settings, page 43).
Blinking lights in the
detection area may disturb
the algorithm and lead to
false alarms.
LARGE / SLOW MOVING
OBJECTS
(e.g. cranes, large vehicles)
Avoid permanently installed
and slow moving objects in
the field of view of the
camera.
If large / slow moving objects
are moving continuously in
the same direction, mount
the camera with view against
the motion direction of the
objects (like conveyor belts).
In case of false alarms, set
Sensitivity to mid/low (see
chapter General settings, page
43).
Large, slow moving objects
behind other objects may
have an appearance similar to
fire or smoke and lead to
false alarms.