AVIOTEC IP starlight 8000 Adjustment of detection settings | en 47
Bosch Sicherheitssysteme GmbH Operation manual 2019.01 | 10 | F.01U.318.200
Output name
An individual name can be assigned to the relay. The name is shown on the button. The Live
page can also be configured to display this individual name.
Toggle
You can click the button to switch the alarm output manually (for example, for testing
purposes). A green check mark appears to indicate that the relay switches.
Notice!
Check carefully the toggle settings before you continue.
Press Set to apply the settings.
To Next Page
Loading...
