Bosch FCS-8000-VFD-B - Adjustment of Detection Settings; General Settings; Adjustments of Image Regions

AVIOTEC IP starlight 8000 Camera integration | en 39
Bosch Sicherheitssysteme GmbH Operation manual 2019.01 | 10 | F.01U.318.200
Pin Alarm socket
1 Alarm in 1
4 Ground
Pin Alarm socket
2 Alarm in 2
5 Ground
Alarm out
Use the alarm output for switching external devices such as lamps or sirens.
Alarm output switching capability:
– Max. voltage 30VAC or +40VDC. Max. 0.5A continuous, 10VA.
Pin Alarm socket
3 Alarm out
6
The maximum wire diameter is 18-28AWG, UL 16-28AWG for both stranded and solid; cut
back 7mm (0.28in) of insulation.
Connection to a fire alarm control panel
The alarm output of the camera can be connected to a fire alarm control panel.
The camera alarm output is triggered by a relay that is normally open. In case of alarm the
relay is closed.