30 en | Installation AVIOTEC IP starlight 8000
2019.01 | 10 | F.01U.318.200 Operation manual Bosch Sicherheitssysteme GmbH
To attach the lens to the camera:
1. Remove the sensor protection cap from the camera.
2. Remove the protection cap from the lens.
3. Screw the lens onto the camera.
Plug the lens connector into the camera (it automatically detects the type of lens).
Pin DC iris lens
1 Damp -
2 Damp +
3 Drive +
4 Drive -
To Next Page
Loading...
