Bosch FLEXIDOME multi 7000i - Page 22

22 en | Configuration
FLEXIDOME multi 7000i | FLEXIDOME multi 7000i
IR
2021-04 | 01 |
User manual
Bosch Security Systems B.V.
Select Custom to enable the Font size (%) field.
– Text color
Select the color for the alarm message to be displayed in.
– Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Camera name stamping
– Position
Select the position of the camera name overlay in the drop-down box. It can be displayed at
the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y position fields.
Optionally, tick the Underlay with full-width bar box to place a full-width background-bar
beneath the time stamp.
i
Notice!
Camera / video names can be changed under General > Identification.
Logo stamping
– Logo
To place a logo on the image, select and upload an uncompressed .bmp file with a maximum
size of 300x300 pixels and 256 colors to the camera.
– Logo position
Use the drop-down menu to select the position of the logo or to hide it (Off).
Time stamping
– Display milliseconds
Click this check box to display the milliseconds in the time stamp.
Note: This information can be useful for recorded video images, however, it does increase the
processor's computing time.
Alarm mode stamping
– Alarm message
Enter the message to be displayed on the image in the event of an alarm. The maximum text
length is 32characters.
Stream security
Select from the Video authentication drop-down box a method for verifying the integrity of
the video.
If you select Watermarking, all images are marked with an icon. The icon indicates if the
sequence (live or saved) has been manipulated.
If you want to add a digital signature to the transmitted video images to ensure their integrity,
select one of the cryptographic algorithms for this signature.
Set the Signature interval [s] for the selected authentication method.