-16-
Intended Use
The laser measure is intended for measuring distanc-
es, lengths, heights and clearances. The laser measure
is suitable for measuring indoors.
F
Shut-off after approximately 5 minutes in the real time measur-
ing function
G
Bluetooth® deactivated
H
Bluetooth® activated
I
Battery compartment not included.
J
For Bluetooth® low energy devices, establishing a connection
may not be possible, depending on model and operating system.
Bluetooth® devices must support the SPP profile.
The laser measure can be clearly identified with the
serial number 11 on the type plate.
To Next Page
Loading...
