Bosch MIC-7230-PB4 - Page 108

Function
Key
Command
No.
Command Description
On/Off 81 Alarm Output 1
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 82 Alarm Output 2
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 83 Alarm Output 3
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 84 Alarm Output 4
Relay
On–Activates output.
Off–Deactivates output.
On/Off 86* Sector Blanking / Masking Enters/exits the Sector Blanking menu.
On/Off 87* Privacy Masking Enters/exits the Privacy Masking menu.
On/Off 89 Preposition Overwrite
Confirmation (toggle)
On–Issues a message that prompts for approval
to overwrite a preposition.
Off–No confirmation message issued.
On/Off 90 Command Lock/Unlock On–Lock on
Off–Lock off
On/Off 91* Zoom Polarity On–Reverse
Off–Normal
On/Off 92* Focus Polarity On–Reverse
Off–Normal
On/Off 93* Iris Polarity On–Reverse
Off–Normal
On/Off 94* Set Azimuth Zero Point /
Recalibrate Azimuth Compass
Sets the zero degree pan position.
Refer to Azimuth, Elevation, and Compass
Directions.
On/Off 95 Display Azimuth/Elevation
Readings
On–Displays azimuth/elevation readings.
Off–Hides azimuth/elevation readings.
Refer to Azimuth, Elevation, and Compass
Directions.
On/Off 96 Display Compass (Point)
Readings
On–Displays compass heading.
Off–Hides compass heading.
Refer to Azimuth, Elevation, and Compass
Directions.
On 99 Factory P/T Home Position Recalibrates home position; can be used as an
Alarm Output.
On/Off 100 Record A Activates/deactivates recording A.
On/Off 101 Record B Activates/deactivates recording B.
102 Wiper alarm Manual on/off
108 en | Keyboard Commands By Number
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.