Typical IP Configuration with NPD-PSU-HPOE
Figure 12.3: Typical IP configuration with NPD-PSU-HPOE
1 MIC7000 camera 6 Audio input / output interface cables
(user-supplied)
2 MIC Hinged DCA (MIC-DCA-Hx) 7 Washer pump accessory
3 High PoE (Network) cable (Cat5e/Cat6;
100 m maximum) (user-supplied)
between camera and NPD-PSU-HPOE
8 Washer output, 2-conductor (user-
supplied)
4 NPD-PSU-HPOE enclosure 9 Alarm input / output interface cables
(user-supplied)
5 120 / 230 VAC 10 Data-only IP cable (Cat5e/Cat6 or fiber)
to head-end network
12.3
36 en | Typical System Configurations
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
To Next Page
Loading...
