Bosch MIC-7230-PB4 - Typical Configuration with MIC-ALM-WAS-24

Typical Configuration with MIC-ALM-WAS-24
Figure 12.2: Typical configuration with MIC-ALM-WAS-24
1 MIC7000 camera 6 24 VAC Power pack, 1A, 50/60 Hz (user-
supplied)
2 MIC Hinged DCA (MIC-DCA-Hx) 7 Washer pump accessory
3 RS-485 cable, 3-conductor (user-
supplied)
8 Interface cable for washer control (user-
supplied)
4 MIC-ALM-WAS-24 enclosure 9 Alarm input / output interface cables
(user-supplied)
5 Interface cable for 24 VAC (user-
supplied) for MIC-ALM-WAS-24
10 Monitored switch for Tamper Alarm
(user-supplied)
12.2
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Typical System Configurations | en 35
Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520