How to improve poor quality thermal image on Bosch IP Camera?
If the thermal image from your Bosch IP Camera is of poor quality, adjust the thermal camera settings to optimize the image quality. Refer to section on Thermal Camera Settings in Operation Manual.
Why is the picture dark on my Bosch Security Camera?
If the picture on your Bosch Security Camera is dark, ensure that the Gain Control is set to High, the Auto Iris Level is set to the appropriate level, and the maximum Ethernet cable distance has not been exceeded. If these settings are correct, try restoring all camera settings.
How to fix weak contrast on Bosch IP Camera?
If the contrast on the screen of your Bosch IP Camera is too weak, adjust the contrast feature of the monitor. If the camera is exposed to strong light, change the camera position. You can also adjust the Optical or thermal camera picture settings for your scene as described in Picture Settings or Picture Settings Thermal in the User Manual.
Why are no OSD messages appearing on my Bosch Security Camera?
If no OSD messages are appearing on your Bosch Security Camera, note that Bosch’s Video SDK is required for OSD messages. Video management software from third parties does not use the SDK.
What to do if Bosch Security Camera doesn't work after extreme cold?
If your Bosch Security Camera does not operate at all, or does not operate as expected, after being subjected to extreme low temperatures (below -40 ° (-40 °F)), allow the camera to warm up for 60 minutes prior to PTZ operations. If the camera still does not operate after this warm-up period, reset the camera by typing “/reset” at the end of the IP address of the camera in your web browser.
What to do if nothing appears on my Bosch Security Camera screen?
If nothing appears on the screen of your Bosch Security Camera, check if the power cord and line connection between the camera and monitor are properly connected.
How to improve poor thermal image quality on Bosch MIC-9502 Security Camera?
If the thermal image from your Bosch Security Camera is of poor quality, adjust the thermal camera settings to optimize the image quality. Refer to the section on Thermal Camera Settings in the Operation Manual.
Why does my Bosch Security Camera thermal image look grainy?
If your Bosch Security Camera thermal image appears grainy, wait for the camera to perform a flat-field correction (FFC). This often occurs when the temperature of the camera fluctuates, such as after the camera is powered on, or when ambient temperature is changing.
What to do if Bosch IP Camera has no network connection?
If your Bosch IP Camera has no network connection, check all network connections to ensure they are properly established. Confirm that the distance between any two Ethernet connections doesn't exceed 100 m (328 ft). If you're behind a firewall, ensure that the Video Transmission mode is set to UDP.
Why Bosch IP Camera has no video?
If your Bosch IP Camera shows no video, first check that the main power to the power supply is switched on. If you're using 24VAC, ensure the voltage at the camera is between 21VAC and 30VAC. When using High PoE, verify that the lights on the midspan indicate correct operation, consulting the midspan manual if needed. Also, check if you can access a web page.
General| Brand | Bosch |
|---|---|
| Model | MIC-9502 |
| Category | Security Camera |
| Language | English |
To Next Page
