Why does my Bosch Security Camera reboot frequently?
To resolve frequent or intermittent reboots of your Bosch Security Camera, try testing it with another power supply. Also, check the Bosch website for a software update that might address the issue, as the problem may stem from an improper network connection.
Why is there no video on my Bosch MIC-9502?
If your Bosch Security Camera is not showing any video, verify that the main power to the power supply is on. For IP-enabled cameras, check if you can access a web page. If you can, try cycling the camera's power off and on. If not, you might have the wrong IP address; use Configuration Manager to identify the correct IP address. Also, ensure there is a 24 V output from the transformer and check the integrity of all wires and mating connectors to the camera.
Why is the picture dark on my Bosch Security Camera?
If the picture on your Bosch Security Camera is dark, ensure that the Gain Control is set to High, the Auto Iris Level is set to the appropriate level, and the maximum Ethernet cable distance has not been exceeded. If these settings are correct, try restoring all camera settings.
Why does my Bosch Security Camera move when trying to control other cameras?
If your Bosch Security Camera moves when attempting to move other cameras, check that the camera’s IP address is properly set. Use Configuration Manager to confirm that two cameras do not have the same IP address, and if they do, change the address of one of the cameras.
General| Brand | Bosch |
|---|---|
| Model | MIC-9502 |
| Category | Security Camera |
| Language | English |
To Next Page
