Bosch NIN-73013 - Page 30

No audio
transmission to
remote station.
Hardware fault. Check that all
connected audio
units are operating
correctly.
Faulty cable
connections.
Check all cables,
plugs, contacts and
connections.
Incorrect
configuration.
Check audio
parameters on the
Audio configuration
and LIVE page
functions pages.
The audio voice
connection is already
in use by another
receiver.
Wait until the
connection is free
and then call the
sender again.
The unit does
not report an
alarm.
Alarm source is not
selected.
Select possible alarm
sources on the Alarm
sources configuration
page.
No alarm response
specified.
Specify the desired
alarm response on
the Alarm
connections
configuration page; if
necessary change the
IP address.
30 en | Troubleshooting
FLEXIDOME IP starlight
7000 VR
2016.06 | v1.0 | AM18-Q0710 Bosch Security Systems