EasyManua.ls Logo

Bosch PRM-4P600 - User Manual

Bosch PRM-4P600
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Power amplifier
PRM‑4P600
en
Installation manual

Table of Contents

Questions and Answers

  • M
    Michael GarzaSep 10, 2025
    Why does the audio from my Bosch Amplifier sound distorted?
    • S
      Shawn MooreSep 12, 2025
      If the audio from your Bosch Amplifier sounds distorted, it could be due to several reasons. First, the input level might be either too high or too low, requiring you to readjust the level on the amplifier. Secondly, the source material might be of poor quality. Lastly, the amplifier might be overdriven, exceeding its maximum output. In this case, you can turn down the volume or consider using a bigger amplifier.
  • A
    andersonjohnSep 12, 2025
    Why is ecoRAIL not activating on my Bosch PRM-4P600?
    • R
      Robert NelsonSep 12, 2025
      If ecoRAIL is not activating as expected on your Bosch Amplifier, the volume might be set too high. Try lowering the volume or consider using more sensitive speakers, which will deliver higher volume with ecoRAIL engaged.
  • Z
    Zachary RobertsonSep 14, 2025
    Why is the sound output weak on my Bosch PRM-4P600?
    • J
      james84Sep 14, 2025
      If your Bosch Amplifier has weak sound output but no fault indications, the input connectors may be wired incorrectly. Ensure that the input cables are correctly matched to the polarity of the source, meaning they are wired correctly.
  • K
    kathleenpadillaSep 16, 2025
    Why is the power button LED continuously blinking on my Bosch PRM-4P600?
    • S
      samuel69Sep 16, 2025
      If the power button LED on your Bosch Amplifier is continuously blinking, this indicates a start-up fault.

Bosch PRM-4P600 Specifications

General IconGeneral
Frequency Response60 Hz - 18 kHz (+1/-3 dB) @ -10 dB below rated output power
Input Impedance20kΩ (balanced), 10kΩ (unbalanced)
Output Impedance4Ω
Signal to Noise Ratio>100 dB
Rated Output Power4 x 600W
THD<0.05%
Power Supply100-240V AC, 50/60Hz
Dimensions (H x W x D)88mm x 483mm x 400mm
ProtectionOverload, short-circuit, thermal
Total Harmonic Distortion<0.05%
Dimensions88mm x 483mm x 400mm

Related product manuals