-13-
Getting to Know Your Miter Saw
42 Clamp is used to hold the workpiece to the table and
base. The clamp is inserted into one of the clamp post
locations.
43 Dust Port is the part that provides the connection to
the dust bag or vacuum hose.
44 Battery Pack (sold separately)
39
38
34
44
43
40
42
7
33
33
35
40
41
Fig. 3
38 Battery Pack Release Button releases the battery
pack so that it can be removed from the battery bay.
39 Battery Bay is where a Bosch or AMPShare battery
pack (sold separately) is inserted.
40 Clamp Post Locations are two vertical post holes in
the base provided to support the clamp.
41 Torx wrench is used to change the blade and to attach
the base extensions.
To Next Page
Loading...
