Bosch PROFACTOR GCM18V-10SDN14 - Cutting Capacities

-15-
Cutting Capacities
Key Moldings / Positioning Maximum Size
Base Molding Against Fence * 5-1/2" (140mm)
38° Crown Molding Angled Against Fence * 5-1/4" (133mm)
45° Crown Molding Angled Against Fence * 5-1/4” (133mm)
Crown Molding Flat on Table 11-1/2" (292mm)
* Within miter range of 0° to 47° Left
Miter / Bevel Maximum Height
0°/ 0° 3-1/2” (89mm)
0°/ 45° (Left) 1-3/4" (45mm)
0°/ 45° (Right) 1" (26mm)
Miter / Bevel Maximum Width
0°/ 0° 11-1/2" (292mm)
45°/ 0° 7-3/4” (197mm)