Bosch Radion B810 - Table of Contents

Table of contents
1
Introduction 5
1.1 About documentation 5
1.2 Bosch Security Systems, Inc. product manufacturing dates 5
2
General installation 7
2.1 Installation workflow 7
2.2 Unpacking information 8
2.3 Wall tamper switch installation 8
2.4 Magnet cover installation 8
2.5 Complete installation 8
2.6 Maintenance 9
3
RADION receiver SD 10
3.1 Certifications and approvals 10
3.2 UL product requirements 11
3.3 B810 installation 14
3.3.1 B810 configuration 14
3.3.2 Base mounting installation 15
3.3.3 Wiring considerations 15
3.3.4 Programming wireless points in the control panel 16
3.3.5 Enroll point RF ID for wireless points (Auto-learn mode) 18
3.3.6 Walk test (for motion detectors) 18
3.3.7 Signal level and margin 19
3.3.8 Complete the installation 20
3.3.9 B810 system test 20
3.4 External LED states 20
3.4.1 LEDs 22
3.5 Specifications (B810) 22
3.5.1 Battery requirements 23
4
RADION repeater 25
4.1 Installation considerations 25
4.2 Wiring considerations 25
4.3 Specifications 26
4.4 LEDs 26
5
RADION glassbreak 28
5.1 Installation considerations 28
5.2 Testing 29
5.2.1 Test the sensor 29
5.2.2 Hand clap test 31
5.3 Low battery 31
5.4 Wall Tamper Tab 31
5.5 Maintenance 31
6
RADION TriTech 32
6.1 Mounting height and range adjustment 32
6.2 Sensitivity settings 33
6.2.1 Standard sensitivity 33
6.2.2 Intermediate sensitivity 33
6.3 Walk testing 33
RADION receiver SD Table of Contents | en 3
Bosch Security Systems, Inc. Reference Guide 2014.03 | 06 | F.01U.261.834