RADION contact RM
The RFDW-RM-A is a recessed-mounted wireless transmitter device used for monitoring doors
and windows. Features include:
– Self-contained transmitter with magnetic reed switch
– Tamper protection
– Recessed mounting on doors or windows
Power/voltage One AAA Lithium battery, 1.5 VDC ( )
Battery replacement Energizer L92. Check your battery yearly to ensure proper
functionality.
Battery life Up to 5 years
Device testing To ensure proper functionality, the device must be tested
at least once every year by an installer.
Dimensions (transmitter) 19.00 mm x 104.80 mm
(0.75 in x 4.12 in)
Dimensions (magnet) 22 mm x 28 mm x 15 mm
(0.87 in x 1.10 in x 0.59 in)
Relative humidity 0% to 93%, non-condensing
Temperature (operating) Functional range: -10°C to +49°C (+14°F to +120°F)
UL only: 0゚C to +49゚C (+32゚F to+120゚F)
Frequency 433.42 MHz
Table 11.1: Specifications
Installation considerations
You have a variety of installation options to consider when installing the device. You must
acknowledge the unique installation approach prior to installation. Some installation
considerations include:
– The installation of this device is suitable for wood surfaces. This device is not suitable for
steel surfaces.
– The transmitter housing was designed to be open with a coin. Using a screwdriver may
cause damage to the plastic top.
– When reinserting the PCB (battery and antenna assembly), verify that the PCB assembly
fits into the grooves of the transmitter housing.
– When reinserting the plastic top, verify that the top fits into the designed grooves of the
transmitter housing.
– When installing the transmitter in an overhead location, be mindful that the PCB
assembly may fall out of the transmitter housing.
– The removal of the plastic flaps is optional, depending on your installation needs.
– For added security, you can use an adhesive with the screws to secure the transmitters
and magnets.
11
11.1
RADION receiver SD RADION contact RM | en 45
Bosch Security Systems, Inc. Reference Guide 2014.03 | 06 | F.01U.261.834