EasyManua.ls Logo

Bosch Radion B810 - RADION Contact SM; Installation Considerations

Bosch Radion B810
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RADION contact SM
The RFDW-SM-A is a standard surface-mount wireless transmitter device used for monitoring
doors and windows.
Features include:
An internal reed switch
A cover and wall tamper switch
Power/voltage One AAA Lithium battery, 1.5 VDC ( )
Battery replacement Energizer L92. Check your battery yearly to ensure
proper functionality.
Battery life Up to 5 years
Device testing To ensure proper functionality, the device must be
tested at least once every year by an installer.
Dimensions (transmitter) 19.50 mm x 82.55 mm x 12.80 mm
(0.76 in x 3.25 in x 0.50 in)
Dimensions (magnet) 24.5 mm x 18.5 mm x 12.5 mm
(0.97 in x 0.72 in x 0.49 in)
Temperature (operating) Functional range: -10°C to +49°C (+14°F to +120°F)
UL only: 0C to +49C (+32F to+120F)
Relative humidity 0% to 93% (non-condensing)
Wall and Cover Tamper Switch Transmits a tamper signal when someone removes the
device from its base or pulls it away from the wall.
Frequency 433.42 MHz
Table 10.1: Specifications
Installation considerations
You have a variety of installation options to consider when installing the device. You must
acknowledge the unique installation approach prior to installation. Some installation
considerations include:
Suitable surfaces for installation include wood, steel, and aluminum.
The location of the magnet and transmitter in relationship to the door/window frame
dimensions. Verify you have proper clearance with the latch of the window or door you
are installing the device onto. Failure to do so will make it extremely difficult to access
and open the device for maintenance purposes.
In some cases, you might need an additional spacer when installing the transmitter and
magnet in the corner of a recessed door or window frame to close the gap in height
between the magnet and transmitter.
For additional security, you can use an adhesive with the screws to secure the
transmitters and magnets during installation.
When installing the magnet, verify that the notches in the magnet base, line up with the
notches in the transmitter base, otherwise the magnet and transmitter do not function
effectively.
10
10.1
RADION receiver SD RADION contact SM | en 43
Bosch Security Systems, Inc. Reference Guide 2014.03 | 06 | F.01U.261.834

Table of Contents

Other manuals for Bosch Radion B810

Related product manuals