Reed switch settings
Set the detector to enable or disable the reed switch.
Notice!
Please note, insert the jumper onto the pin prior to installing the battery. Failure to do so may
result in unexpected operation of the device.
Callout ￚ Description
1 ￚ No jumper disables the internal reed switch
2 ￚ Jumper on enables the internal reed switch
13.2
RADION receiver SD RADION universal transmitter | en 51
Bosch Security Systems, Inc. Reference Guide 2014.03 | 06 | F.01U.261.834
To Next Page
Loading...
