Bosch rexroth 4WS2EM10 5X XH Series - 2.3 Improper Use and Personnel Qualification

10/44 Safety instructions
Bosch Rexroth AG, 4WS2EM10..5X/...XH..., RE29583-XH-B/09.19
The valve is designed and constructed for the control of oil flows. It complies with
the requirements of the ATEXDirective2014/34/EU.
You can find details about the device group, category, temperature class and
equipment protection level (EPL) in accordance with ATEXdirective 2014/34/EU
and the derived standards in "Datasheet29583-XH" under "Information on explosion
protection" and on the name plate of the valve.
The valve may only be operated in a technically perfect condition and used as
described in these operating instructions. The connection conditions, application
conditions and performance data defined in these operating instructions must not
be changed.
If you intend to use the valve with other connection, application or performance
data than those defined by BoschRexrothAG in these operating instructions,
pleasecontact BoschRexrothAG beforehand. The valve must not be used with other
connection, application and performance data than those defined in these operating
instructions without the written approval by BoschRexrothAG.
2.3 Improper use
Any use deviating from the intended use is improper and thus not admissible.
The installation or use of inappropriate products in safety-relevant applications could
result in unintended operating states when being used which in turn could cause
personal injuries and/or damage to property. Therefore, please only use a product
for safety-relevant applications if this use is expressly specified and permitted in
the documentation of the product. For example, in explosion-protected areas or in
safety-related control components (functional safety).
Improper use of the product includes:
• Faulty assembly
• Incorrect transport
• Lack of cleanliness during storage and assembly
• Incorrect installation
• Use of inappropriate/non-admissible hydraulic fluids
• Non-compliance with the specified performance limits
Changes and/or modifications to the valve are not admissible, refer to chapter13
"Extension and modification".
BoschRexrothAG does not assume any liability for damage caused by improper use.
The user assumes all risks involved with improper use.