Bosch rexroth 4WS2EM10 5X XH Series - Transport and Storage; 6.1 Transporting the Valve; 6.2 Storing the Hydraulic Valve

20/44 Transportand storage
Bosch Rexroth AG, 4WS2EM10..5X/...XH..., RE29583-XH-B/09.19
6 Transportand storage
6.1 Transporting the valve
CAUTION
Danger of damage to property and personal injuries!
With improper transport, the valve can fall and lead to damages and/or injuries
since the parts are e.g.sharp-edged, oily, instable, loose or bulky.
▶ Use the original packaging for transport.
▶ Use personal protective equipment (such as gloves, working shoes,
safetygoggles, working clothes, etc.)
▶ Comply with the national laws and regulations regarding occupational health
and safety and transport.
▶ Do not transportthe valve using components with little stability, e.g. cables.
Sharp edges!
Danger of cut injuries!
▶ Wear suitableprotective equipment for the transportof the valve.
Further information regarding transportis available from BoschRexroth,
seechapter16.1 "List of addresses".
Notify your responsible sales contact person any transportdamage within one
week. The addresses of the sales subsidiaries can be found on the Internet at:
http:/www.boschrexroth.com/adressen
6.2 Storing the hydraulic valve
Valves are delivered in a perfect state.
For transportand storage of the product, always observe the environmental
conditions specified in the "Datasheet29583-XH". Improper storage may damage
the valve.