Bosch rexroth 4WS2EM10 5X XH Series - Safety Instructions; 2.1 General Safety Information and Intended Use

Safety instructions 9/44
RE29583-XH-B/09.19, 4WS2EM10..5X/...XH..., Bosch Rexroth AG
1.3.3 Abbreviations
The following abbreviations are used in this documentation:
Table 4: Abbreviations
Abbreviation Meaning
ATEX EUDirectivefor Explosion Protection (Atmosphère explosible)
EN European Standard
ISO International Organization for Standardization
IEC International Electrotechnical Commission
RE Rexroth document in English language
IP Ingress protection class of electric operating equipment
A, B Hydraulic connections (actuator)
X, Y Hydraulic connections (pilot oil)
T Hydraulic connection (tank)
P Hydraulic connection (pump)
ANSI American National Standards Institute
2 Safety instructions
2.1 General information on this chapter
The product has been manufactured according to the generally accepted codes of
practice. However, there is still the danger of personal injury and damage to property
if you do not observe this chapterand the safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with the
product.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the product on to
third parties.
2.2 Intended use
The product is a hydraulic component.
You may use the product as follows:
• 4-way directional servo valve with mechanical position feedback for the intended
use in an explosive atmosphere.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation completely,
especially chapter2 "Safety instructions".