6/60 About this documentation
Bosch Rexroth AG, A10VO, A10VSO, A10VSNO Series 32, RE 92714-01-B/04.2018
Table 1: Required and supplementary documentation
Title Document number Document type
Axial piston units for operation with fire-resistant hydraulic fluids – anhydrous,
hydrous
(HFDR, HFDU, HFA, HFB, HFC)
Describes the requirements on fire-resistant, anhydrous and hydrous hydraulic
fluids (HFDR, HFDU, HFA, HFB, HFC) and contains the technical data for operation
with Rexroth axial piston units.
90225 Data sheet
Information on the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at low
temperatures.
90300-03-B Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312 Data sheet
Axial piston variable pumps A10V(S)O and A10VO series 3x and 5x with EF
electro-proportional differential pressure control
92709 Data sheet
Universal through drive for axial piston variable pumps A10VSO, A4VSO,
A15VSO/A15VLO and A11V(L)O
95581 Data sheet
Pressure relief valve, direct operated 25402 Data sheet
Proportional pressure relief valve 29166 Data sheet
Pressure and flow control system 30630 Data sheet
Pump safety block 25880 Data sheet
Pump safety block 25891 Data sheet
Electric amplifier 29904 Data sheet
Analog amplifier modules 29741 Data sheet
1.3 Representation of information
Standardized safety instructions, symbols, terms and abbreviations are used
throughout this documentation so that you can work quickly and safely with your
product. For clarification, they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6 “Product-specific
safety instructions” on page 12 and in chapter 3 “General instructions regarding
property and product damage” on page 15, as well as before a sequence of
actions or an instruction for action involving a risk of personal injury or property
damage. Always follow the instructions on avoiding the dangers associated with the
use of this product.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Measures to prevent danger
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if safety instructions are disregarded
• Precautions: states how the danger can be avoided
To Next Page
Loading...
