18/64 General instructions on property damage and product damage
Bosch Rexroth AG, A4VG Series35, RE92035-01-B/2019-11-25
NOTICE
Danger due to chemical or aggressive environmental conditions!
Product can be damaged! If the axial piston unit is exposed to chemical or
corrosive environmental conditions, such as sea water, fertilizer or road salt, it can
result in corrosion or, in extreme cases, malfunction. Leaks may lead to a leakage of
hydraulic fluid.
▶ Take appropriate measures to protect the axial piston unit from chemical or
corrosive environmental conditions.
Leakage or spilling of hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶ Always place a drip tray under the axial piston unit when filling and draining
hydraulic fluid.
▶ Use a suitable binding agent to collect any leaked hydraulic fluid.
▶ Observe the safety datasheetfor the hydraulic fluid and the specifications
provided by the machine/system manufacturer.
Danger due to heat development in components!
Adjacent products may be damaged! Due to a heat development in components
(e.g.solenoids), adjacent products may be damaged during assembly if no
sufficient safety distance is complied with.
▶ When installing the axial piston unit, check the safety distances to nearby
products to ensure that they are not damaged.
The warranty exclusively applies to the delivered configuration.
The warranty will be voided if the product is incorrectly installed,
commissionedoroperated, or if it is used or handled improperly.
To Next Page
Loading...
