Bosch Rexroth A4VG 35 Series - Default Chapter; Table of Contents

Contents 3/64
RE92035-01-B/2019-11-25, A4VG Series35, Bosch Rexroth AG
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 8
2 Safety instructions 9
2.1 About this chapter 9
2.2 Intended use 9
2.3 Improper use 9
2.4 Personnel qualifications 10
2.5 General safety instructions 11
2.6 Product-specific safety instructions 12
2.7 Personal protective equipment 15
3 General instructions on property damage and product damage 16
4 Scope of delivery 19
5 About this product 20
5.1 Performance description 20
5.2 Product description 20
5.2.1 Axial piston unit layout 20
5.2.2 Functional description 21
5.3 Bypass function 22
5.3.1 Activating and deactivating the bypass function 22
5.4 Product identification 24
6 Transportand storage 25
6.1 Transporting the axial piston unit 25
6.1.1 Transportby hand 25
6.1.2 Transportwith lifting devices 25
6.2 Storing the axial piston unit 28
7 Installation 30
7.1 Unpacking 30
7.2 Installation conditions 30
7.3 Installation position 32
7.3.1 Below-reservoir installation (standard) 32
7.3.2 Above-reservoir installation 33
7.4 Installing the axial piston unit 34
Contents
7.4.1 Preparation 34
7.4.2 Dimensions 35
7.4.3 General instructions 35
7.4.4 Installation with a coupling 36
7.4.5 Installation on a gearbox 36
7.4.6 Installation with cardan shaft 37