Bosch Rexroth A4VG 35 Series - Representation of information

6/64 About this documentation
Bosch Rexroth AG, A4VG Series35, RE92035-01-B/2019-11-25
Table 1: Required and supplementary documentation
Title Document number Document type
Axial piston units for operation with fire-resistant
hydraulic fluids – water-free, water-containing
(HFDR, HFDU, HFA, HFB, HFC)
D
e
scribes the requirements on fire-resistant, water-free and
water-containing hydraulicfluids (HFDR, HFDU, HFA, HFB, HFC) and
contains the technical data for operation
with Rexroth hydraulic components.
90225 Data sheet
Component class: 92035-CC-0001_ETPump
The component class specification explains what data is available,
howthis data was obtained, and gives further notices to be observed.
92035-CC-0001_ETPump Component class
specification
BODAS-drive eDA application software
BODAS-drive eDA is a software solution integrated in the Rexroth
SRC-eDA1/31 control unit for controlling the hydrostatic drive train in
wheeled vehicles.
95315 Data sheet
BoschRexroth Fluid Rating List for Rexroth hydraulic components
(pumps and motors)
Contains the hydraulic fluids positively evaluated by BoschRexroth.
90245 Data sheet
Information on the application of hydrostatic drives at low temperatures
Contains additional information on the application of Rexroth axial piston
units at low temperatures.
90300-03-B Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312 Data sheet
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6 "Product-specific
safety instructions" on page12 and in chapter 3 "General instructions on property
damage and product damage" on page16, as well as before a sequence of actions
or an instruction for action involving a risk of personal injury and property damage.
Always follow the measures for danger prevention associated with the use of this
product.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Danger prevention measures
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if safety instructions are disregarded
• Precautions: states how the danger can be avoided