26/68 Transport and storage
Bosch Rexroth AG, A4VG Series 40, RE 92004-01-B/05.2017
You can hoist the axial piston unit as shown in Fig. 5 with the eye bolt screwed into
the drive shaft.
Fig. 5: Fixing the eye bolt
WARNING! Danger from suspended loads!
During transport with a lifting device, the axial piston unit can topple out of the
lifting strap and cause injuries.
▶ Use the widest possible lifting strap.
▶ Make sure that the axial piston unit is securely fixed with the lifting strap.
▶ Only guide the axial piston unit by hand for fine positioning and to avoid
oscillations.
▶ Never stand or put your hands under a suspended load.
▶ Place the lifting strap around the axial piston unit in such a way that it does not
pass over assembled parts (e.g. valves, piping) and that the axial piston unit is
not suspended from assembled parts (see Fig. 6).
Fig. 6: Transport with lifting strap
Transport with lifting strap
To Next Page
Loading...
