Bosch Rexroth ctrlX SAFETY - Standards Relevant to Components; Standards Relevant to Machinery

4.3.2 Standards relevant to components
Product group Standard Title
Electric drives IEC 61800‑5‑2
Adjustable speed electrical power drive systems, Part 5‑2:
Safety requirements - Functional
Complex controls IEC 61508‑1 to IEC 61508‑7
Functional safety of electrical/electronic/programmable
electronic safety-related systems
Tab. 4-3: Standards relevant to components
4.3.3 Standards relevant to machinery
Standard Title
ISO 12100
Safety of machinery ‑ General principles for design - Risk assessment and risk reduction
IEC 60204-1 Safety of machinery ‑ Electrical equipment of machines
IEC 62061 Safety of machinery ‑ Functional safety of safety-related electrical, electronic and
programmable electronic control systems
ISO 13849-1
ISO 13849-2
Safety of machinery ‑ Safety-related parts of control systems
Part 1: General principles for design
Part 2: Validation
ISO 13850 Safety of machinery ‑ Emergency stop ‑ Principles for design
EN 1037 Safety of machinery ‑ Prevention of unexpected start-up
ISO 13855 Safety of machinery ‑ The positioning of protective equipment in respect of approach speed
of parts of the human body
ISO 14119 Safety of machinery ‑ Interlocking devices associated with guards ‑ Principles for design
and selection
ISO 11161 Safety of machinery ‑ Integrated manufacturing systems ‑ Basic requirements
ISO 10218-1
ISO 10218-2
Robots for industrial environments ‑ Safety requirements
Part 1: Robots
Part 2: Robot systems and integration
EN 1010‑1 Safety of machinery ‑ Safety requirements for the design and construction of printing and
paper converting machines, Part 1: Common requirements
EN 848‑3 Safety of woodworking machines ‑ One side moulding machines with rotating tools, Part 3:
Numerically controlled (NC) boring and routing machines
EN 415-1
to
EN 415-8
Safety of packaging machines
Part 1 to Part 8
EN 201 Plastics and rubber machines - Injection moulding machines - Safety requirements
EN 12415 Safety of machine tools ‑ Small numerically controlled turning machines and turning centres
EN 12417 Machine tools ‑ Safety ‑ Machining centres
EN 13218 Machine tools ‑ Safety ‑ Stationary grinding machines
Tab. 4-4: Standards relevant to machinery
ctrlX SAFETY "Safe Torque Off" Safety Option in ctrlX DRIVE 19/65
System overview
R911383774_Edition 03 Bosch Rexroth AG