Bosch Rexroth IndraControl L10 - 7 Connections and Interfaces; Overview about the Connections on the Front Panel

7 Connections and Interfaces
7.1 Overview about the Connections on the Front Panel
Designation
on the hous‐
ing
Connection type Connector type (integrated) Mating connector or cable (from outside)
X7E Network connection:
Ethernet 10Base T / 100Base X
RJ45 female connector, 8-pin RJ45 male connector (8-core twisted pair)
Fig.7-1: IndraControl L10 connections
CAUTION
Fitting or removing connectors with the IndraControl
L10
being live may
damage the unit or an additional module!
Turn off the supply voltage before establishing or breaking any connections!
Project Planning Manual | Rexroth IndraControl L10 Electric Drives
and Controls
| Bosch Rexroth AG 23/54
Connections and Interfaces
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com