EasyManua.ls Logo

Bosch Rexroth IndraControl L10 - Inline Bus

Bosch Rexroth IndraControl L10
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ordered separately). In addition, data and programs are stored to this card.
Operation without flash card is not possible.
It is only allowed to use Compact Flash cards of Bosch Rexroth.
DANGER
Operation without memory card causes uncontrolled movements!
Be
sure not
to remove the compact flash card as long as the
IndraControl L10 is in operation.
7.5 Inline Bus
To its right, the IndraControl L10 can be extended by additional Rexroth Inline
modules.
Such modules permit an extension of the I/O unit to 16-byte inputs
and outputs.
The maximum number of Rexroth Inline modules that can be connected is 63.
For further information on the connection of Rexroth Inline modules,
please refer to
/6/ "Automation terminals of the Rexroth Inline prod‐
uct family" (DOK-CONTRL-ILSYSINS***-AW..-EN-P, part number
911317021).
34/54 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl L10 | Project Planning Manual
Connections and Interfaces
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com

Table of Contents

Related product manuals