① Battery case at the control
Fig.14-1:
2. Use the plastic strip to pull the battery out of the housing.
3. To insert a new battery, pull the battery cover forward using the plastic
strap attached thereon (see ② in 14-2).
② Battery cover with plastic strip
③ Battery
Fig.14-2: Inserting the new battery
4. Using the strap, insert the new battery into the battery holder with the
positive terminal (see ③ in 14-2) facing the rear side of the housing.
5. Afterwards, engage the battery cover at the control housing.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
54/65
Maintenance
To Next Page
Loading...
