Code I / Code II (EN 60034-7)
IM B5 / IM 3001 Flange attachment on the drive side of the flange
IM V1 / IM 3011
Flange attachment on the drive side of the flange, drive
side facing down
IM V3 / IM 3031
Flange attachment on the drive side of the flange, drive
side facing up
Avoid liquid at the drive shaft or the shaft sealing ring in case of vertical installa-
tion according to IM V3. For further information regarding the protection class,
see chapter 4.2.6 "Degree of protection" on page 19.
4.2.13 Coating
1K-standard varnish, water-based, RAL 9005 black
An additional varnish with a coat thickness of max. 40 µm is allowed.
Protect all safety notes (stickers), type plates and open connectors with a paint-
ing protection when painting additionally.
MS2N Synchronous Motors
Bosch Rexroth AG
About this product
DOK-MOTOR*-MS2N*******-IT03-EN-P
31/95
To Next Page
Loading...
